THERMAL PROPERTY OF CARBON RESIN ELECTRODES DEVELOPED FOR ELECTROCHEMICAL TREATMENT OF WATER AND WASTEWATERS

Main Article Content

I. A. Oke
A. O. Obijole
E. A. Adekunbi
J. O. Babajide
M. D. Idi
T. A. Aladesanmi

Abstract

In this paper, thermal conductivity of carbon resin electrodes developed for electrochemical treatment of water and wastewater was investigated. Carbon resin electrodes were developed from used dry cells and resin using non-heat treatment processes. Thermal conductivity of the electrodes was measured and effects of particle size, compacting pressure, carbonisation temperature and percentage of the resin used on thermal conductivity of the electrodes were monitored using standard method through RE 890G and ALDA AVD 890G thermocouples at two different points (5cm apart). Effective thermal conductivity of the electrodes was modelled using Okazaki et al model.


The study revealed that thermal conductivity of carbon resin electrodes ranged from 1.39 W/K. cm to 2.24 W/K. cm. Thermal conductivity of the material increased with decreased particle size (1.48 to 2.24 W/K. cm with 245 to 45mm) and decreased percentage resin (1.49 to 2.20 W/K. cm with 12 % to 1%), decreased with decreased compacting pressure (2.12 to 1.44 W/K. cm with 110 MN/ m2 to 60 MN/ m2) and carbonization temperature (2.12 to 1.39 W/K. cm with 260 oC to 30o C). Okazaki et al model agreed reasonably with the experimental data with correlation coefficient of 0.3206 and coefficient of determination 0.9917. It was concluded that particle size, compacting pressure, carbonization temperature and percentage resin play important role in thermal conductivity of carbon resin electrodes.

Article Details

Section
Articles

References

Abou-Sena, A; Ying, A and Mohammed, (2007). A Experimental measurements of the effective thermal conductivity of a lithium titanate (Li2TiO3) pebbles-packed bed. Journal of Materials Processing Technology. 181, 206-212.

Adem, K and Hakan, A. (2007). Effect of porosity on thermal conductivity of powder carbon resin materials. Materials and Design. 28, 230-233.

Arohi, M,. Rai, A. K. and Amit, K. Y. (2015) Enhanced Thermal Conductivity of Epoxy Matrix Composites Filled With Boron Nitride Particles. International Journal of Mechanical Engineering and Technology, 6(5), 10-16. 2015

Bera, T, Acharya, S.K. and Punyapriya, M. (2018). Synthesis, mechanical and thermal properties of carbon black/epoxy Composites. International Journal of Engineering, Science and Technology.10(4), 12-20

Chang, C.-W. and Dinh, N.T. (2019) Classification of machine learning frameworks for data-driven thermal fluid Models. International Journal of Thermal Sciences. 135, 559-579.

Chen, G. (2004). Electrochemical Technologies in Wastewater Treatment Separation. Purification Technologies 38(1), 11-41.

EungjeLee, R. ArashSalgado, B. Lee, A. V, .Suman, T.C., Johnson, A. A., Balandin, E.V.S. (2018) Design of lithium cobalt oxide electrodes with high thermal conductivity and electrochemical performance using carbon nanotubes and diamond particles . Carbon.129, 702-710.

Kuzhir, P., Paddubskaya, A., Plyushch, A., Volynets, N., Maksimenko, S., Macutkevic, J., Kranauskaite, I., Banys, J., Ivanov, E., Kotsilkova, R. and Celzard, A., (2013). Epoxy composites filled with high surface area-carbon fillers: Optimization of electromagnetic shielding, electrical, mechanical, and thermal properties. Journal of Applied Physics, 114 (16), 164304.

Leemsuthep A., Mohd Nayan, N.A., Zakaria, Z. and Uy Lan, D.N.,(2017). Effect of sodium bicarbonate in fabrication of carbon black filled epoxy porous for conductive application. Macromolecular Symposia, 371(1), 44-49.

Lin, F, Bhatia, C. S. and Ford, J. D.(1993). Thermal Conductivities of Powder-Filled Epoxy Resins. Journal of Applied Polymer Science, 49, 1901-1908.

Mohammad,B. N. and Norbert E. (2019) Powerful analytical solution to heat flow problem in welding. International Journal of Thermal Sciences 135. 601-612.

Nelkon, M.. (2002). Principles of Physics, 9th edn, Longman Group Limited, Lagos.

Oke, I. A (2006) Development and Performance- Testing of an Electrochemical Process for Selected Industrial Wastewaters. Unpublished PhD. Thesis, (Civil Engineering Department), Obafemi Awolowo University, Ile-Ife.

Oke, I. A (2009a) Orthogonal Experiments in the Development of Carbon-Resin For Chloride Ions Removal. Statistical Methodology. 6, 109-119

Oke, I. A; Oladepo, K.T and Ogedengbe, M.O (2007c). Utilization of 2k Factorial Experiments For The Determination of factors That Influence Electrochemical Process. Ife Journal of Technology, 19(2), 48-54.

Oke, I. A, Umoru, L.E and Ogedengbe, M.O. (2007a). Properties and Stability of A Carbon-Resin Electrode. Journal of Materials and Design. 28(7), 2251-2254.

Oke, I. A, Umoru, L.E and Ogedengbe, M.O. (2007b) 2k Factorial Experiments on Factors That Influence Stability of Carbon Resin Electrodes. FUTAJEET. 5(2), 135-141.

Oke, I. A. M. A. Asani; J.A Otun; N.O. Olarinoye and S. Lukman: (2012) Effects of Aluminium and Calcium Oxide on Carbon Resin Electrodes Developed for Use in Electrochemical Treatment of Wastewaters. Edited by Adeyemo, R. Cuviller Verlag Gottingen, Internationaler Wissenschaftlicher Fachverlag. 67-74.

Oke, I. A; Lukman, S, lsmail, A.; Fehintola, E.O and Amoko, J.S. (2017). Removal of Lead Ions From Water and Wastewaters Electrochemically in Water Purification edited by Alexandru, M.G. Published by Academic Press (An imprint of Elsevier). 9, 643-691.

Oke, I.A (2009b) Influence of Carbonization On Selected Engineering Properties Of Carbon Resin Electrodes For Electrochemical Treatment Of Wastewater. Canadian Journal of Chemical Engineering, 87 (10), 801-811

Oke, I.A; L. E Umoru,; O. E. Olorunniwo;F. I Alo, and M. A. Asani (2010a). Properties and Structures of Iron Doped Carbon Resin Electrodes for Wastewaters Treatment. Solid Waste Management and Environmental Remediation. Edited by Faerber, T and Herzog, J. Nova Science Publisher Inc New York. 467-484.

Oke, I. A. M. A. Asani; J.A Otun; N.O. Olarinoye and S. Lukman: (2010b) Effects of Aluminium and Calcium Oxide on Carbon Resin Electrodes Developed for Use in Electrochemical Treatment of Wastewaters. Edited by Adeyemo, R. Cuviller Verlag Gottingen, Internationaler Wissenschaftlicher Fachverlag. 67-74

Rahmani, H., Najafi, S.H.M. and Ashori, A., (2014). Mechanical performance of epoxy/carbon fiber laminated composites. Journal of Reinforced Plastics and Composites, 33(8), 733-740

Ramvir S and Sharma, P.K. (2011). Effective thermal Conductivity of metal filled polymer composites. Indian Journal of Pure and Applied Physics. 112 -116.

Ravi, V., Upendra, B., Kasthurirengan, S, Shivaprakash, N.C, Udgata, S. S and Gangradey, R. (2017). Measurement of thermal conductivity of materials down to 4.5 K for development of cryosorption pumps. IOP Conf. Series: Materials Science and Engineering 171. 012098 https://doi.org/10.1088/1757-899X/171/1/012098

Singh, T.N; Sinhe, S and Singh, V.K (2007).Prediction of thermal conductivity of rock through physico-mechanical properties. Building and Environment 42, 146-155.

Wang, L. Wu, P; Yang, J and Ni, X (2007). Modelling of heat transfer between a high temperature fluidized bed and an immersed surface by a surface particle emulsion model. Chemical Engineering Science., 62, 503-.512.

Wu, C; Muthanni, H.A and Prakash, A (2007).Heat Transfer coefficient in a high pressure Bubble column. Chemical Engineering Science., 62, 140-147.

Yang, K., Gu, M., Guo, Y., Pan, X. and Mu, G., (2009). Effects of carbon nanotube functionalization on the mechanical and thermal properties of epoxy composites. Carbon, 47(7), 1723-1737.

Yue, J., Xu, Y. and Bao, J., (2017). Epoxy' carbon black composite foams with tunable electrical conductivity and mechanical properties: Foaming improves the conductivity. Journal of Applied Polymer Science, 134(33), 45-71.

Yuen, S.M., Ma, C.C.M., Wu, H.H., Kuan, H.C., Chen, W.J., Liao, S.H., Hsu, C.W. and Wu, H.L., (2007). Preparation and thermal, electrical, and morphological properties of multiwalled carbon nanotubeand epoxy composites. Journal of Applied Polymer Science, 103(2), 1272-1278.

Zhang, W., Zhang, X., Liang, M. and Lu, C., (2008). Mechanochemical preparation of surface-acetylated cellulose powder to enhance mechanical properties of cellulose-filler-reinforced NR vulcanizates. Composites Science and Technology, 68(12), 2479-2484.

Zhou, T., Wang, X., Liu, X. and Xiong, D., (2010). Improved thermal conductivity of epoxy composites using a hybrid multi-walled carbon nanotube/micro-SiC filler. Carbon, 48, (4). 1171-1176.

Zhu, H; Zhang, C; Tang, Y; Wang, J; Ren, B and Yin, Y (2007). Preparation and thermal conductivity of suspension of graphite nano particle. Carbon, 45, 226-228.