Equipment Maintenance Management Audit of Some Granite Aggregate Quarries in Part of South - West Nigeria

Authors

  • S. O. Abdulraman Earth Values Ventures Limited, Taoheed Road, Off Basic ROAD, Ilorin, Nigeria
  • B. M. Olaleye Department of Mining Engineering, The Federal University of Technology, Akure, Nigeria
  • M. A. Saliu Department of Mining Engineering, The Federal University of Technology, Akure, Nigeria

Keywords:

Maintenance management, performance rating, productivity, Granite Quarry

Abstract

This paper analyses an existing maintenance management system in some selected typical granite aggregate quarries (represented as K1, K2 and K3) in part of South- west Nigeria using modied questionnaire and interview. The quarries' current maintenance management effectiveness was evaluated with respect to five basic elements of
maintenance management. The quarries were rated in accordance with global best practices with credits / points ranging from 1 to 3. Investigation shows that K1 and K2 had average overall ratings of 1.45 and 1.39 respectively. These scores fell below average performance, which informed their inability to operate at profit and call for urgent improvement decisions in all elements of maintenance management benchmarked. K3 scored 2.48, which indicates that the quarry adopts an effective maintenance management system, but will also need to improve on its preventive maintenance and maintenance scheduling. This paper is therefore an assessment initiative for maintenance and productivity continuous improvement and can be integrated as a part of a decision support system for maintenance management in the quarry industry.

References

Abdulraman, S. O. (2016): Quarry Finance and Management, In Proceedings of Nigerian Society of Mining Engineers' (NSME, Kaduna chapter) National Workshop with the theme “Modern Trends in Quarry Operations”, PP. 118.

Alsyouf, I. (2006), Measuring Maintenance Performance using a Balanced Score Card Approach, Journal of Quality in Maintenance Engineering, Vol. 12, pp. 133-149

Blanchard, B.S. (2004): Logistics Engineering and Management, 6th ed., Prentice Hall Pearson, p. 546.

Dhillon, B.S. (1987): Engineering Management, Techonomic Publishing Co., Lancaster, Pennsylvania, p. 352.

Dhillon, B.S. (2002): Engineering Maintenance: A Modern Approach, CRC Press LLC, Florida, p. 222. EN 13 306 (2001): Maintenance Terminology, CEN European Committee for Standardisation.

ERHQ-0004, (1976): Maintenance Manager's Guide, Energy Research and Development Administration, Washington, D.C.

Eti, M. C., Ogaji, S. O. T. and Probert, S. D. (2004): “Implementing total productive maintenance in Nigerian manufacturing industries”, Applied Energy, Vol. 79, pp. 385- 401

Khan, M.R.R. and Darrab, I.A. (2010): Development of Analytical Relation between Maintenance, Quality and Productivity, Journal of Quality in Maintenance Engineering, pp. 341- 353.

Marshall Institute Incorporation, (1999): Maintenance Management Effectiveness Survey, p.8.

Niebel, B.W. (1994): Engineering Maintenance Management, Marcel Dekker, New York.

Samanta, B. and Sarkar, B. (2003): TPM and Assessment of Overall Effectiveness for Mining Equipment. Coal Mining Technology and Management, Vol. 8, No. 2, pp. 10-21.

Samanta, B. Sarkar, B. and Mukherjee, S.K (2001a): Maintenance Management-a Key Factor to Success for Mechanized Coal Mine, Coal Mine Technology & Management, Vol 6, No 2, pp. 8-14.

Samanta, B., Sarkar, B., and Mukherjee, S.K. (2001b): Reliability Centred Maintenance (RCM) for Heavy Earth-Moving Machinery in an Open Cast Coal Mine. CIM Bull, pp. 104-108.

Unger, R. L., Conway, K. (1994): Impact of Maintainability Design on Injury Rates and Maintenance Costs for Underground Mining Equipment. In: Improving Safety at Small Underground Mines, compiled by R. H. Peters Reports No. Special Publication 18- 94, US Bureau of Mines, Washington, DC, pp. 140- 167.

Willmott, P., and McCarthy, D., (2000). TPM: A Route to World Class Performance. Butterworth Heinemann, Oxford, p 264.

Wireman, T., (2005): Developing Performance Indicators for Managing Maintenance, 2nd Edition, Industrial Press, New York, p. 250

Downloads

Published

2019-05-03