Performance Evaluation of an Electromechanical Groundnut Roasting Machine Akintade A.M, Olukunle O. J. and Isa J.

Authors

  • A. M. Akintade Department of Agricultural and Environmental Engineering, Federal University of Technology,Akure, Nigeria
  • O. J. Olukunle Department of Agricultural and Environmental Engineering, Federal University of Technology,Akure, Nigeria
  • J. Isa Department of Agricultural and Environmental Engineering, Federal University of Technology,Akure, Nigeria

Abstract

The performance evaluation of an electromechanical groundnut roasting machine was conducted with the aim of achieving efficient roasting conditions and eliminating the drudgery associated with roasting groundnut. The machine was tested in the Department of Agricultural Engineering, Federal University of Technology, Akure, Nigeria using fresh groundnuts purchased at a local market. A total of one hundred and eighty-nine experimental tests were carried out. Temperature, mass of the groundnut, moisture content of the groundnut and speed of the machine were considered and varied for the purpose of this research while 3×3×3×7ǃ randomized complete block design was used. The machine was tested using seven different temperature levels of 70â°C, 100â°C, 150â°C, 200â°C, 250â°C, 3000C and 350â°C for three different masses of groundnut while the machine speed was varied. The results showed that changes in machine operating parameters especially roasting temperature, moisture content and machine speed affected significantly the roasting efficiency, conveyance efficiency, quality efficiency and mechanical damage. The maximum values of roasting efficiency of 94.58%, conveyance efficiency of 99.56%, quality efficiency of 99.40% and mechanical damage of 32.35% were obtained at various roasting temperature of 700C, 1000C, 1500C and 2000C, while a minimum value of roasting efficiency of 60.07%, conveyance efficiency of 56%, quality efficiency of 35.99% and mechanical damage of 0.50% were obtained respectively. The optimum performance of the machine was obtained under a temperature range of 150 - 2000C, machine speed of 12.8 rpm and moisture content of 15.8%. The machine roasting capacity was found to be 36.91 kg/hr.

 

Keywords: Groundnut seeds, Roasting chamber, Conveyor, Optimum Performance, Roasting time

References

Adetunji, M. (2004). Post Harvest for Food Security and Economic Development. Paper Presented at the Regional Workshop on Post Harvest Technology as a Panacea to Food Security and Economic Development. Akure-Nigeria

Afonja, S. (1998): Planning of the Technology Needs of Women in Agriculture. Workshop on the Promotion of the Adoption of Appropriate Agro Processing Technologies Proceedings, Post Harvest Technology Research Group , Obafemi University, lle-Ife, Nigeria. pp. 7

Asiedu, J. J. (1989). Processing Tropical Crops: A Technological Approach Macmillan Press Ltd. Pp 24-1431

Athapol, N., Kanagarajah, P. and Cesar, C. T., (1992). Accelerated Drying of Groundnut in Batch Rotary Drier ASEAN Food Journal Vol. 7(3): 159

Chavda, T. V. and Naveen, K., (2009) Solar Dryer for high Value Agro products at spreri International Solar food processing conference. pp: 1-4

Francisco, C. K., Sherlie, H. W. and Josede, B. F., (2006) Drying Peanut Seed using Air Ambient Temperature at low Relative humidity Revis ta Brasi lerrade sementes, Vol. 28 pp 1-5

Groundnut Seeds Product News (2004). Sustainable Seeds System for West Africa-ICROSAT

Kabri, H. U., Ankidawa, 8. A., and Elson, J. (2006) Modification and Performance Evaluation of a Manually Operated Drum Groundnut Roaster, Savannah Journal of Agriculture, ISSN: 1595-9377, vol.1 (2): 88-93).

Norde, E. N., Jense, C. and Helsel, J. D. (1982) Priority and strategies for Agricultural Research In Nigeria Institute for Agricultural Research, ABU, Samaru Zaria. National Workshop for Groundnut pp. 34

Olalusi, A. P. (2011) Effect of Using Locally- Developed Dryers On The Drying Characteristics and Qualities of Sheanut Ph. D . Thesis, Federal University o f Technology Akure, Nigeria. Pg. 21-24.

Thaddus, H. (2004) Design, Construction and Testing of a Groundnut Seed Drum Roaster, B.Eng. Project, Department of Agricultural Engineering, Federal University of Technology, Yola Nigeria.

Woodroof, J. G., (1983) Peanuts -Production: Processing Products 3rd Edition Westport, Connecticut AVI publising company.

Downloads

Published

2019-03-28